AS ISO 5349.1 pdf download
AS ISO 5349.1 pdf download Mechanical vibration—Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements Scope This part of ISO 5349 specifies general requirements for measuring and reporting hand-transmitted vibrationexposure in three orthogonal axes. lt defines a frequency weighting and band-limiting filters to allow uniformcomparison of measurements. The values obtained can be used to predict adverse...
AS ISO 12646 pdf download
AS ISO 12646 pdf download Graphic technology—Displays for colour proofing—Characteristics and viewing conditions The refresh rate non-interlaced, shall be at least 80 Hz 4.4 Uniformity of luminance The display should be visually uniform when displaying flat white, grey and black images. When measured asdescribed in 5.3, all luminance values should be within 5 % of the luminance of the centre...
AS ISO 13007.2 pdf download
AS ISO 13007.2 pdf download Ceramic tiles—Grouts and adhesives Part 2: Test methods for adhesives Scope This part of ISO 13007 describes methods for determining characteristics for adhesives used in the installationof ceramic tiles.The test methods described are the following: a) determination of open time: b) determination of slip: c) determination of shear adhesion strength; d) determination of tensile adhesion...
AS ISO 13007.4 pdf download
AS ISO 13007.4 pdf download Ceramic tiles—Grouts and adhesives Part 4: Test methods for grouts 4.1.1.3 Testing machine, of flexural strength type, capable of applying the load with suitable capacity and sensitivity for the test. The machine shall be provided with a flexure device in accordance with Figure A.3. 4.1.1.4 Testing jig, in accordance with Figure A.4, incorporated in the...
ISO 2721 pdf download
ISO 2721 pdf download Photography — Film-based cameras — Automatic controls of exposure automatic setting of camera exposureaction ofthe automatic exposure controlintended to maintain substantially constant exposure at the focalplane for a preset film speed for all values offield luminance within the exposure capabilities ofthe camera Note 1 to entry: The film speed setting may be made manually or may...
ISO 2974 pdf download
ISO 2974 pdf download Diesel engines — 60 degree female cones for high-pressure fuel injection components Scope This International Standard specifies the dimensional requirements of end-connections for highpressure fuelinjection equipment components, used on diesel (compression-ignition) engines. lt is applicable to externally threaded 60° female cones (see Figures 1, 2, 5 and 6) and intended for usewith high-pressure fuel injection pipe...
ISO 3807 pdf download
ISO 3807 pdf download Gas cylinders — Acetylene cylinders — Basic requirements and type testing Scope This International Standard specifies the basic and type testing requirements for acetylene cylinders withand without fusible plugs with a maximum nominal water capacity of 150 1 and requirements regardingproduction/batch test procedures for manufacturing of acetylene cylinders with porous material. lt does not include details...
ISO 4241 pdf download
ISO 4241 pdf download Cinematography — Theatre projection leader, trailer and cue marks — Specifications Scope This International Standard specifies the makeup or assembly of time-based leaders and cue marks for70 mm, 35 mm, and 16 mm motion-picture release prints. NOTE Extraneous materials are dealt with in Annex A 2 Normative reference The following documents, in whole or in part,...
ISO 4355 pdf download
ISO 4355 pdf download Bases for design of structures — Determination of snow loads on roofs This International Standard specifies methods for the determination of snow load on roofs It can serve as a basis for the development of national codes for the determination of snow load on roofs. National codes should supply statistical data of the snow load on...
ISO 5431 pdf download
ISO 5431 pdf download Leather — Wet blue goat skins — Specification 1 Scope This International Standard specifies requirements, methods of sampling and methods of test for wetblue leather produced from goat skins tanned without hair and with the use of basic chromium sulfateas the primary tanning agent. 2Normative references The following documents, in whole or in part, are normatively...