ISO 19292 pdf download

ISO 19292 pdf download Ships and marine technology — Lifesaving and fire protection — Point- type resettable flame detectors for ships
Scope
This International Standard specifies requirements, test methods, and performance criteria for pointtype, resettable flame detectors that operate using radiation from a flame, for use in fire detectionsvstems installed on ships,This lnternationalStandard referencesIS0 7240-10 for requirements commonto both terrestrial and marine applications and adds the requirements applicable to installations in theshipboard environment.
2Normative references
The following documents, in whole or in part, are normatively referenced in this document and areindispensable for its application, For dated references, only the edition cited applies. For undatedreferences, the latest edition of the referenced document (including any amendments) applies.
ISO 7240-1, Fire detection and alarm systems – Part 1: General and definitions
ISO 7240-10:2012, Fire detection and alarm systems — Part 10: Point-type flame detectors
IEC 60068-2-1, Environmental testing – Part 2-1: Tests – Test A: Cold
IEC 60068-2-2, Environmental testing – Part 2-2: Tests — Test B: Dry heat
IEC 60068-2-6, Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)EC 60068-2-30, Environmental testing – Part 2-30: Tests – Test Db and guidance: Damp heat, cyclic (12+12-hour cycle)
EC 60068-2-52, Environmental testing — Part 2-52: Tests – Test Kb: Salt mist, cyclic (sodium, chloridesolution)
IEC 61000-4-2,Ed. 1.2:2001 (b) Electromagnetic compatibility (EMC)- Part 4-2: Testing and measurementtechniques — Electrostatic discharge immunity test
EC 61000-4-4:2004,Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurementtechniques – Electrical fast transient/burst immunity test
IEC 61000-4-5:2005,Electromagnetic compatibility (EMC)– Part4-5: Testing and measurement techniques- Surge immunity test
IEC 61000-4-6:2006,Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurementtechniques – lmmunity to conducted disturbances, induced by radio-frequency fields
CISPR 16-1,Specification for radio disturbance and immunity measurement apparatus and methods — Part1-1: Radio disturbance and immunity measuring apparatus – Measuring apparatus
CISPR 16-2,Specification for radio disturbance and immunity measurement apparatus and methods — Part2-1: Methods ofmeasurement ofdisturbance and immunity -Conducted disturbance measurements
3 Terms and definitions
For the purposes ofthis document, the terms and definitions given in ISO 7240-1 and ISO 7240-10 apply.
4 General requirements
The apparatus shall comply with all of the requirements of ISO 7240-10:2012 with the exception of 5.7 to 5.17 and Annex D. In lieu of 5.7 to 5.17 of ISO 7240-10:2012, point-type flame detectors for ships shall meet the requirements of Clause 5 of this International Standard.
5 Marine test requirements
5.1 General
Flame detectors classified for marine applications shall be tested according to the test schedule specified in Table 1.
5.2 Dry heat (operational)
5.2.1 Object of test
The object of the test is to demonstrate the ability of the specimen to function correctly at high ambient temperatures appropriate to the anticipated service environment.
5.2.2 Test procedure and apparatus
5.2.2.1 General
The test apparatus and procedure specified in IEC 60068-2-2, Test Bb, and by 5.2.2.2 to 5.2.2.4 below shall be used.