ASME B18.8.2 pdf download
ASME B18.8.2 pdf download TAPER PINS, DOWEL PINS, STRAIGHT PINS, GROOVED PINS, AND SPRING PINS (INCH SERIES) 1.1 Scope 1.1.1 This Standard is intended to cover the com- plete dimensional and general data for taper pins, dowel pins, straight pins, grooved pins, and spring pins recognized as “American National Standard,” which are widely used in general industrial applications. Also included...
ASME B18.9 pdf download
ASME B18.9 pdf download Plow Bolts 2.1.2 Unless otherwise specified in the order by the purchaser, bolts that are not threaded full length shall be furnished with full diameter body within the limits specified in the dimensions tables. On bolts that are threaded full length, the diameter of the unthreaded length under the head or neck shall not be less...
ASME B18.10 pdf download
ASME B18.10 pdf download Track Bolts and Nuts 2.2 Necks Types of track bolts are designated as “oval neck” and “elliptic neck.” 2.3 Body Diameters This Standard provides for two styles of body diame- ters. Bolts shall be provided with a full size body in accordance with the respective table dimensions ofTable 1 or 2 for body diameter, E, unless...
ASME B18.13 pdf download
ASME B18.13 pdf download Screw and Washer Assemblies – SEMS (Inch Series) 1 INTRODUCTION 1.1 Scope This Standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS. SEMS products may include screws, tapping screws, or bolts in sizes No. 0 through 1 ⁄ 2 in. diameters in various grades...
ASME B18.15 pdf download
ASME B18.15 pdf download Forged Eyebolts 6 SHANK LENGTH Shank length includes the chamfer to the underside of the eye ring for plain pattern (straight shank) and to the faced collar for shoulder pattern eyebolts. 7 MATERIAL 7.1 Carbon and Alloy Steel Forged The material and mechanical property requirements for general purpose carbon steel eyebolts shall be in accordance with...
ASME B18.16 pdf download
ASME B18.16 pdf download Nylon Insert Locknuts (Inch Series) 11 MATERIAL, MECHANICAL, AND PERFORMANCE PROPERTIES 11.1 Material and Processes 11.1.1 Material. Carbon steel nuts shall conform to the requirements of Table 4. Alternate material may be used if agreed upon with the purchaser. The nylon insert material shall be sufficient to meet the prevailing-torque requirements of Tables 2 and 3...
ASME B18.18.1 pdf download
ASME B18.18.1 pdf download Inspection and Quality Assurance for General Purpose Fasteners 1 GENERAL INFORMATION 1.1 Basic Plan Structure This Standard outlines a Quality Assurance Plan forinternally and externally threaded fasteners and accessories or associated parts.Provisions are included forsampling plans,inspection frequencies, control proce-dures, and record keeping. Included in this plan are fasteners for general purposeapplications, such as those where hand...
ASME B18.18.2 pdf download
ASME B18.18.2 pdf download Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners 2.1 Scope This Standard is an Acceptance Sampling Plan for high-volume machine assembly fasteners, accessories, and associated parts. It establishes specific inspection functions that must be performed on the finished prod- uct or at the appropriate stage of manufacturing with the objective of ensuring that the accepted...
ASME B18.18.6M pdf download
ASME B18.18.6M pdf download Qalty Asuranre Plan for Fasteners Produced in a ThirdParty Acreditation System 3 THIRD PARTY ACCREDITATION SYSTEM 3.1 Scope For the purpose of this Standard, third party registra-tion is the successful conclusion of a structured auditingand approval board process that has verified complianceof an audited quality system to a specified qualitysystem standard. Such compliance is determined by...
ASME B18.18 pdf download
ASME B18.18 pdf download Quality Assurance for Fasteners This Standard places a Cp0 expectation on the sample plans shown herein. However it should be recognized that zero nonconformities (Cp0) in a sampling does not necessarily mean that the population is entirely free of defects. Statistical process control and other variation low- ering measures can significantly reduce the number of defects...