ASME NM.2 pdf download
ASME NM.2 pdf download Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems ASME Standards for Nonmetallic Pressure Piping Systems 1-1 SCOPE (a) This Standard provides requirements for the design, materials, manufacture, fabrication, installation, examination,andtestingofglass-fiber-reinforcedthermo- setting-resin (FRP) piping systems. (b) FRP piping, as used in this Standard, includes pipe, flanges, bolting, gaskets, valves, fittings, special connect- ingcomponents,andthepressure-containingorpressure- retaining portions of other piping components, whether manufactured...
ASME NML-1 pdf download
ASME NML-1 pdf download Rules for the Movement of Loads Using Overhead Handling Equipment in Nuclear Facilities 1-4 RESPONSIBILITY Compliance with this Standard is the responsibility ofthe owner. 1-5 DEFINITIONS cascading failures: a process in a system ofinterconnectedparts in which the failure of one or a few parts can triggerthe failure of other parts and so on. design rated torque:...
ASME NQA.TR pdf download
ASME NQA.TR pdf download Evolution of Quality Assurance Principles and Requirements in the U.S. Nuclear Industry 1.1 SCOPE This Section describes the evolution of nuclear qualityassurance from early quality control and inspection requirements for AEC nuclear weapons production andnaval reactors programs; to the more comprehensivequality assurance program requirements for nuclearweapons production and AEC/DOE reactor developmentand technology activities; to the series...
ASME NTB-2 pdf download
ASME NTB-2 pdf download Background Information for Addressing Adequacy or Optimization of ASME BPVC Section III, Division 5 Rules for Metallic Components 1.3Subsection HG Class A Metallic Core Support Structures Section 17.4.4.10 provides a brief overview ofhow the core support rules relate to the Subsection NG ruleswhen creep effects are negligible and to the HBB rules in BPVC Section Ill,...
ASME NTB-3 pdf download
ASME NTB-3 pdf download Gap Analysis for Addressing Adequacy or Optimization of ASME Section III, Division 5 Rules for Metallic Components 1.2Issue l. 2 – Simplified Bounds for Creep Ratcheting 1.2.1Summary From O°Donnell, Hull and Malik [l] Item OG- 5: The Draft Code Case for Alloy 617 imposes ratcheting strain limits that are similar to theimits given in Subsection NH,...
ASME NTB-4 pdf download
ASME NTB-4 pdf download Background Information for Addressing Adequacy or Optimization of ASME BPVC Section III, Division 5 Rules for Nonmetallic Core Components INTRODUCTION Before its appearance in the 201l edition of ASME BPVC, there was no internationally recognized graphitecore design code. Although the need for such a code was recognized by stakeholders such as the US NuclearRegulatory Commission (NRC)...
ASME NTB-5 pdf download
ASME NTB-5 pdf download Guidance for Determination of Risk-Informed Safety Classification for Light Water Reactor Nuclear Facility Pressure Retaining Components 1 SCOPE This document provides a process for determining the Risk-Informed Safety Classification (RISC) of light water reactor nuclear facility Class 1, 2 and 3 pressure-retaining components and their welded attachments and supports. Pressure retaining components may include passive components...
ASME P30.1 pdf download
ASME P30.1 pdf download Planning for Load Handling Activities SECTION I:CHARTER FOR P30 -PLANNING FORTHE USE OF CRANES，DERRICKSHOISTS，CABLEWAYS，AERIALDEVICES，AND LIFTING ACCESSORIESCOMMITTEE The development and maintenance of standards thatsupport load handling activities where mechanicaequipment including, butnot limited to, cranes,derrickshoists, cableways aerial devices, materiallifting accessories, and combinations thereof are used SECTION Il: PURPOSE The P30 Standard is intended to (a) prevent or minimize...
ASME PALD 11 pdf download
ASME PALD 11 pdf download SAFETY STANDARDS FOR PORTABLE AUTOMOTIVE LIFTING DEVICES 1.1 Scope This Standard applies to hydraulic and mechanicalwheel dollies characterized by a pair of laterally spacedlifting members that raise and lower in unison and areso arranged as to contact the vehicle wheel(s) at twoareas on its circumference for the purpose of raisingremoving, transporting, and replacing wheel and...
ASME B56.11.7 pdf download
ASME B56.11.7 pdf download LIQUD PROPANE GAS (LPG) FUEL CYLINDERS (HORIZONTAL 0 VERTICAL) MOUNTING-LIOUID WTHDRAWAL-FOR POWERED |INDUSTRIAL TRUCKS 1 SCOPE This Standard establishes dimensions for LPG fue! cylinders used on powered industrial trucks. 2 PURPOSE The purpose of this Standard is to promote theinterchangcability of 20#、33.5#and 43.5# LP-Gascylinders used on powered industrial trucks. 3 INTERPRETATION 3.1 Mandatory and Advisory Rules...