ASME B107.53 pdf download
ASME B107.53 pdf download Ball Peen Hammers: Safety Requirements SCOPE This Standard provides performance and safetyrequirements for bal] peen hammers. Ball peen hamunershave a striking face on one end of the head for use instriking punches and chisels, and a ball peen on theopposite end for use in riveting, shaping, and straightening unhardened metals This Standard is intended toserve as...
ASME B107.300 pdf download
ASME B107.300 pdf download Hand Torque Tools and Torque Testers 4 CLASSIFICATIONSee Tables 4-1, 4-2, and 4-3. 5 PERFORMANCE REQUIREMENTS Figures are descriptive and not restrictive. They are notintended to preclude the manufacture or purchase ofotherforms of torque instruments conforming to this Standard.Torque instruments shall pass all applicable tests insection 6. Unless otherwise specified,torque instruments shall becalibrated in the direction(s)...
ASME B107.600 pdf download
ASME B107.600 pdf download Screwdrivers and Screwdriver Bits 5.5 Handle The handle shall be suitably finished to provide a comfortable grip. The handle shall be free from rough edges, sharp corners, or tool marks that affect comfort while using the tool. When the handle is furnished with a cushion grip, there shall be no detectable slippage between the handle and...
ASME B107-4 pdf download
ASME B107-4 pdf download Driving and Spindle Ends for Portable Hand, Impact, Air, and Electric Tools (Percussion Tools Excluded) SCOPE This Standard applies to portable power tools fordrilling, grinding, polishing, sawing, and drivingthreaded fasteners and hand tools for driving threadedfasteners. Other tools not classed as percussion tools belong in this category and may be added by revision oraddition through the...
ASME B107-12 pdf download
ASME B107-12 pdf download Nutdrivers 4.1.3 Type II: Stubby Length. Type II nutdrivers shall consist of round steel shaft with socket at one end and a handle at the other end. A bolt clearance hole shall be provided in the shaft of the socket end. The nutdriver shall be similar to Fig. 3 and conform to Table 3 or 3M...
ASME B107-56 pdf download
ASME B107-56 pdf download BOOY REPAIR HAMMERS AND DOl l ‘ BLOCKS: SAFETY REQUIREMENTS 、4.1.2 The fender bumper has a striking surface anda struck face. See Fig. 3(e). 4.1.3 The chamfer on the bumping dinging, finishing.and other striking faces shall be a minimum of 0.010in.(0.25 mm). 4.1.4 Handles shall be of any design includingergonomic, that will withstand the appropriate testsspecified...
ASME B107-60 pdf download
ASME B107-60 pdf download Pry Bars 1SCOPE This Standard provides performance and safetyrequircments for pry bars that are intended for separat-ing prying.ripping, lifting scrapingand aligning applications. Therc are numerous varieties of pry bar designsand intended uses. Pry bars are not designed to bestruck. This Slandard covers specific types of pry barsand their intended safe uses. This Standard is intended to...
ASME B107-410 pdf download
ASME B107-410 pdf download Struck Tools Incorporation of ASME B107.43, ASME B107.44, ASME B107.46, ASME B107.48, ASME B107.49, ASME B107.50, ASME B107.52, and ASME B107.59 4.2 Materials The materials used inthe manufacture ofwedges shall be such as to produce wedges conforming to the requirements specified herein. 4.3 Mechanical Properties The hardness of the wood-splitting wedges shall not exceed 35 HRC...
ASME BPVC-V pdf download
ASME BPVC-V pdf download VNONDESTRUCTIVE EXAMINATION Interpretations of the Code have historically been posted in January and July at http://cstools.asme.org/interpreta- tions.cfm. Interpretations issued during the previous two calendar years are included with the publication ofthe applic- able Section ofthe Code in the 2015 Edition. Interpretations ofSection III, Divisions 1 and 2 and Section III Appendices are included with Subsection NCA....
ASME BPVC-VII ADD pdf download
ASME BPVC-VII ADD pdf download RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS This international code or standard was developed under procedures accredited as meeting the criteria for American NationalStandards and it is an American National Standard. The Standards Committee that approved the code or standard was balanceto assure that individuals from competent and concerned interests have had an opportunity...