ASME A112.19.7 pdf download
ASME A112.19.7 pdf download Hydromassage bathtub systems 1.1 This Standard specifies general requirements, test methods, and markings for whirlpool and air-jettedbathtubs and suction fittings used in hydromassage bathtub systems that incorporate a bathtub andcirculation pump.The circulation pump can be with or without(aa piping system; and(b) induction of air (which can be achieved by integral suction or through an air pump)....
ASME A112.19.8A pdf download
ASME A112.19.8A pdf download Addenda to ASME A112.19.8-2007 Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs 1GENERAL 1.1 Scope 1.1.1 General Requirements, This Standard establishes materials, testing, and marking requirements forsuction fittings that are designed to be totally submergedfor use in swimming pools, wading pools, spas, and hottubs, as well as other aquatic facilities. 1.1.2...
ASME A112.19.10 pdf download
ASME A112.19.10 pdf download DUAL FLUSH DEVICES FOR WATER GLOSETS 1.1 Scope This Standard covers physical and performancerequirements and test methods pertaining to dual flushdevices that are installed within water closet tanks whichuse 3.5 gpf (13.2 Lpf) or greater volume, to reduce totalvolumetric water consumption. 1.2 Units of Measurement Values are stated in U.S. customary units and in theInternational System...
ASME A112.19.12 pdf download
ASME A112.19.12 pdf download Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drain Waste Systems 1 GENERAL 1.1 Scope This Standard establishes physical requirements andtests addressing structural strength; adjustments; mate-rials; drain line hydraulics; and mechanical, materialtesting, marking, and documentation requirements forwall mounted and pedestal mounted,adjustable, elevat-ing,tilting,and pivoting lavatory, sink, and shampoobowl...
ASME A112.19.19 pdf download
ASME A112.19.19 pdf download Vitreous China Nonwater Urinals GENERAL1 1.1 Scope This Standard establishes requirements and test methods pertaining to materials, significant dimensions, andfunctional performance for vitreous china nonwater uri-nals. The sanitary performance requirements andtestprocedures apply to all types of nonwater urinals thatdischarge into gravity waste systems in permanentbuildings and structures independent of occupancy. 1.2 Units of Measure Where values...
ASME A112.20.2 pdf download
ASME A112.20.2 pdf download Qualification of Installers of Firestop Systems and Devices for Piping Systems GENERAL1 1.1 Scope This Standard establishes minimum requirements,identified by industry consensus, for the training andqualification of installers of firestop systems and devicesfor piping systems. The qualifications under this Standard are restrictedto those that are required by this Standard, the modelbuilding and plumbing codes requirements for...
ASME A112.1002 pdf download
ASME A112.1002 pdf download Anti-siphon fill valves for water closet tanks 2 Reference publications and definitions 2.1 Reference publications This Standard refers to the following publications, and where such reference is made, it shall be to theedition listed below, including all amendments published thereto. ASME(American Society of Mechanical Engineers)/CSA GroupASMEA112.18.1-2018/CSA B125.1-18 Plumbing supply fittings ASME A112.19.2-2018/CSA B45.1-18 Ceramic plumbing fixtures...
ASME A112.1016 pdf download
ASME A112.1016 pdf download Set-up for high-temperature conditioning, pressure and temperature variation, and water supply pressure loss tests 4.3 Working pressure test 4.3.1 Purpose The purpose of this test is to determine if the device can withstand pressures between 1 40.0 and 860.0 kPa (20 and 1 25.0 psi). 4.3.2 Procedure with the valves closed The device shall be tested...
ASME A112.1037 pdf download
ASME A112.1037 pdf download Performance requirements for pressurized flushing devices for plumbing fixtures 1 Scope 1.1 This Standard covers pressurized flushing devices (PFDs) intended to flush water closets, urinals, and otherplumbing fixtures and specifies requirements for materials, design, methods of operation, test methods.and markings. 1.2 in this Standard, “shall” is used to express a requirement, .e, a provision that the...
ASME A182 pdf download
ASME A182 pdf download SPECIFICATION FOR CARBON STEEL FORGINGS, FOR GENERAL-PURPOSE PIPING 5. Chemical Composition 5.1 An analysis of each heat shall be made by the manufacturer to determine the percentages of the elements specified in Table 1. The chemical composition thus deter- mined shall conform to the requirements in Table 1. 6. Mechanical Properties 6.1 The material shall conform...