ASME A112.63 pdf download
ASME A112.63 pdf download Floor and Trench Drains 2.1.1 Castings. Castings shall be sound, free ofblowholes, cold shuts, fins, and other imperfections, andshall be of uniform thickness and true to pattern. 2.1.2 Cast lron. Cast iron shall comply with Class 25specified in ASTM A48. 2.1.3 Ductile lron. Ductile iron shall comply withor exceed the requirements of Grade 60-40-18, 60-42-10,60-45-12,or 80-55-06...
ASME A112.14.3 pdf download
ASME A112.14.3 pdf download GREASE INTERCEPTORS Tapered threads shall comply with ASME B1.20.1. Hubless connections shall comply with the dimensional requirements of ASTM A 888. 2.4 Flow Controls and/or Vents 2.4.1 The use and placement of flow controls and/ or vents or air intakes for grease interceptors shall be the option of the manufacturer. 2.4.2 When a flow control and/or...
ASME A112.18.1 pdf download
ASME A112.18.1 pdf download PLUMBING FIXTURE FITTINGS ntay: when used, indicates an alternate requirement oroption. metering faucet: a faucet that, after actuation, dispenseswater for a predetermined volume or period of timeFixed or adjustable cycle duration or volume areallowable mtixing ualve, single confrol: fitting with a single controlthat shall serve to turn water on and off, and to changtvolume and temperature...
ASME A112.18.2 pdf download
ASME A112.18.2 pdf download Plumbing waste fittings 1 Scope 1.1 This Standard covers plumbing waste fittings of sizes NPS-2 and smaller. 1.2 Plumbing supply fittings are covered by ASME A1 1 2.1 8.1 /CSA B1 25.1 . 1.3 Other devices, e.g., temperature-actuated in-line mixing valves and flexible connectors under continuous pressure, are covered by CSA B1 25.3 or other plumbing...
ASME A112.18.6 pdf download
ASME A112.18.6 pdf download Flexible water connectors 4.2.1 Copper alloy components shall contain at least 56% copper. 4.2.2 Stainless steel components in contact with water shall be made from 300 or 400 series stainless steel.Ferrous steel parts not in contact with water shall be protected by a coating that complies withClause 4.3. 4.3 CoatingsCoatings shall be tested in accordance with...
ASME A112.18.9 pdf download
ASME A112.18.9 pdf download Protectors/ Insulators for Exposed Waste and Supplies on Accessible Fixtures GENERAL 1.1 Scope This Standard shall show material and performancespecifications and use of protectors/insulators forexposed waste and supplies for public/commercialandprivate/residential buildings using product coveredunder this Standard. This Standard is intended to also cover products thatwill satisfy the requirements of ICC/ANSI A117.1Standard for Accessible and Usable Buildings...
ASME A112.19.1 pdf download
ASME A112.19.1 pdf download Enamelled cast iron and enamelled steel plumbing fixtures 1 Scope 1.1 This Standard covers enamelled cast iron and enamelled steel plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. 1.2 This Standard covers the following plumbing fixtures: (a) bathtubs; (b) drinking fountains and water coolers; (c) lavatories; (d) shower bases; and (e) sinks:...
ASME A112.19.2 pdf download
ASME A112.19.2 pdf download Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals GENERAL 1.1 Scope This Standard establishes requirements and test meth-ods pertaining to materials, significant dimensions, andfunctional performance for vitreous china plumbing fixtures. The sanitary performance requirements and testprocedures apply to all types of water closets and urinalsthat discharge into gravity waste systems in permanentbuildings...
ASME A112.19.4 pdf download
ASME A112.19.4 pdf download STAINLESS S’ ‘EEL PLUMBING FIXTURES (DESIGNED FOR RESIDENTIAL USE) 23.3 Kitchen Sink Drainboards. Drainboards (asshown in Tables A7 through A13) shall be fastenedto sink compartments, and shall be formed by stampingpressing, fabrication, or combination thereof. The drairarea of a drainboard sink shall be at least 6 in. (mm) below flood level at a location farthest from...
ASME A112.19.5 pdf download
ASME A112.19.5 pdf download Trim for Water-Closet Bowls, Tanks, and Urinals 1GENERAL 1.1 Scope This Standard establishes criteria for those items oftrim for water-closet bowls, tanks, and urinals knownas spuds,locknuts for spuds, flush valves,and flushelbows.Requirements for fill valves (ballcocks) aredefined in ANSI/ASSE 1002. This Standard does not address the compatibility ofmaterials. Nothing stated herein shall preclude the production of special...